Chevy Tri Five Forum banner

Sender contact broke inside

744 Views 1 Reply 2 Participants Last post by  Pops @
Hey all, The connecting copper strap that goes to the wire hook-up in my fuel tank sending unit is broke and i wonder if it's possible to wire the two pieces back together? A 20ga. wire between the break, or should i just replace it? I was surprised to see that, when everyone else finds a bad float, which is what i expected to find. My float is fine and the strap-wire connection is pretty tough in there to just break like that. Thanks for any suggestions.
1 - 2 of 2 Posts
All I can say is give it a whirl....What 'ya got to lose.....Man those repo sending units sure are a POS. :mad:tdi
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.