Chevy Tri Five Forum banner
1 - 2 of 2 Posts

29 Posts
Discussion Starter · #1 ·
I have a T10 for which I ordered a new speedo gear (didn't come with one when I bought the car). The problem is that when installed, the speedo cable end does not reach the gear when the cable is attached to the bullet. I've tried to pull any slack out of the cable but still no go. Are there different bullet lengths available? It would seem a shorter bullet or longer gear shaft would solve the problem.

Gear shaft length is 1.75'" from the tip to the gear.
Bullet length is 2.25".

1 - 2 of 2 Posts