Chevy Tri Five Forum banner
1 - 1 of 3 Posts

· Registered
6,388 Posts
Hi, I believe I have a two speed W/S/W motor on my 57 Bel Air but can only get high speed when I rotate the wiper knob (& boden cable). Is there a way to adjust this better? Thanks. Butch
The knob controls a cable that slides the switch that is on the motor. I would start there. disconnect the cable and see if you can get both speeds by sliding the white piece .
Good luck,
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.