I have my used custom twin turbo big block chevy turbo kit. This kit on my old 67 camaro made a best of 1151 Wheel horse / 1288 Wheel Torque @ 23psi. 1050 wheel @ 19psi , 880 at 12psi and 693 horse @ 6psi...The intake manifold does not come with injectors or a TPS.. No electronics included.. Only had approx 200 miles on this setup and ~24 hours of dyno time.
This is what is included:
Custom made BBC STAINLESS tubular manifolds ( driver & pass side ) manifolds were coated with a high temp thermal coating to keep keep heat in the pipes, but if you like the shiny look all you will need to do is sand blast them to bring back the nice stainless shine ..
2- Tial 38MM wastegates w/ 3 psi and 9psi springs
1- Tial BOV 60MM
1- custom front mount 3.5" thick intercooler w/ vertical bar and plate internals.. I made over 900 wheel horse on pump gas, so I know the intercooler works well.
1- Edelbrock Jr Victor 454 Rectangular port intake manifold W/ custom made EFI tap & rails for port fuel injection. If you don't use fuel injection you can just block off these ports.
1- 90MM intake elbow aluminum
2- Polished Garrett T-67 T4 .96 A/R Turbos
Since these pics I painted the intake, elbow, rails, wastegates and headers with hi temp 1400 degree black paint because I looked the subtle look more than the shiny.. If you like the shiny look you can blast them and polish the parts to bring back the shine or have them powder coated any color you want
$4000.00.. let me know if anyone is interested
![Image]()
![Image]()
This is what is included:
Custom made BBC STAINLESS tubular manifolds ( driver & pass side ) manifolds were coated with a high temp thermal coating to keep keep heat in the pipes, but if you like the shiny look all you will need to do is sand blast them to bring back the nice stainless shine ..
2- Tial 38MM wastegates w/ 3 psi and 9psi springs
1- Tial BOV 60MM
1- custom front mount 3.5" thick intercooler w/ vertical bar and plate internals.. I made over 900 wheel horse on pump gas, so I know the intercooler works well.
1- Edelbrock Jr Victor 454 Rectangular port intake manifold W/ custom made EFI tap & rails for port fuel injection. If you don't use fuel injection you can just block off these ports.
1- 90MM intake elbow aluminum
2- Polished Garrett T-67 T4 .96 A/R Turbos
Since these pics I painted the intake, elbow, rails, wastegates and headers with hi temp 1400 degree black paint because I looked the subtle look more than the shiny.. If you like the shiny look you can blast them and polish the parts to bring back the shine or have them powder coated any color you want
$4000.00.. let me know if anyone is interested
