New wiring, American Autowire Hwy 15 installed in my 55. Just about to give up of the brake lights!! Very frustrated at this point. Taillights all work, blinkers work, but for the life of me, can't get the brake lights to work. Have replaced the stoplight switch, have created good ground at the taillight assembly "drivers side or primary". Also checked and replaced the 20amp fuse marked "bat3 stop and ctsy" in the fuse box. This fuse was blown, for some reason! Have also replaced the 1157 bulb. All bulb recepticles sand blasted clean before re-wire done. Any suggestions on what I may have forgotten to do or what to try next, would be greatly appreciated... Thanks
Brake Light's Not Working dilema..
kenwhit
1 - 3 of 9 Posts
Joined
·
58 Posts
New wiring, American Autowire Hwy 15 installed in my 55. Just about to give up of the brake lights!! Very frustrated at this point. Taillights all work, blinkers work, but for the life of me, can't get the brake lights to work. Have replaced the stoplight switch, have created good ground at the taillight assembly "drivers side or primary". Also checked and replaced the 20amp fuse marked "bat3 stop and ctsy" in the fuse box. This fuse was blown, for some reason! Have also replaced the 1157 bulb. All bulb recepticles sand blasted clean before re-wire done. Any suggestions on what I may have forgotten to do or what to try next, would be greatly appreciated... Thanks
1 - 3 of 9 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
